The selected product display requires Javascript enabled in your browser. Please enable Javascript and try again!

Wireless Outside and Generic Sensors | KLU-FL Wireless Outside Temperature and Humidity Transmitter

SyxthSense wireless sensor range that caters for any typical building application using the latest RF technology. The products have been designed to operate in wide range of environments and proven to operate reliably in all situations. The TEFL and TEU-FL wireless sensors have transmission range of up to 40..100m inside buildings and up to 500m line of sight. The transmission range can be extended with upto 8 repeaters to cater most applications. The sensors can be used to wirelessly transmit any typical building information such as temperature, humidity, volt-free contacts, light level, CO2, setpoint etc. The intuitive FLTA receiver can be connected to BMS/Controllers via 0..10Vdc signals or via its Modbus communication protocol. Up to 99 sensors can be connected to one FLTA network.

KLU-FL is combined outdoor humidity and temperature transmitter with input for LUX11 light level sensor. The measurement readings are transmitted on change. The humidity measurement uses accurate elements to provide 2%rH accuracy. The LUX11 sensors can be connected for light level transmission.

 
Wireless Outside Temperature and Humidity Sensor  


Power Supply: 3.6V AA Lithium Battery
Battery Life: Tranmission every 6 seconds : Up to 1 year
Tranmission every 1, 5, 15, 30 minutes: Up to 6 years
RF Transmission: 868.30 MHz FSK Modulation
Transmission Range: Line of sight: Up to 500m
In buildings up to 20..100m depending on wall strcutures
Range can be extended up to 8 times with FLREP repeaters
Measurement Range: Temperature: -50..+150°C
Humidity: 0..100% rH
Light: Via Lux11 0..1000 Lux
Measurement Accuracy: Temperature: +/-0.5°C (at 25°C)
Humidity: +/-2% rH (at 25°C)
Addressing: Via FLSER Service Tool
Cable Gland: M16
Protection Class: IP54. Cable Gland Downwards
Dimensions: W115 x H115 x D45mm
£